Franšais Espa˝ol Deutsch English Italiano
Multiple wire saws that can cut 2 and 3 cm slabs of length up to 3.5 m and height 2.1 m
catalogo Download 0.498 MB
DOUBLE TOP
Machine to cut slabs, for up to 2 diamond wires. PLC control system. Also available in the Roller version (with the machine on track).
acrobatreader
download 1.2MB
catalogo Download 0.794 MB
Pentawire
Machine to cut slabs, for up to 5 diamond wires. PLC control system. Also available in the Roller version (with the machine on track).
pentawire
acrobatreader
download 0.95MB
Pentawire 5/5 AT
This multiwire system combines production and flexibility; it is equipped for running up to 5 diamond wires and represents the best response to a frequent thickness changing but also the possibility to realize mixed thicknesses in the same shot, to cut both "cm" and "inch" sizes as well as thicknesses out of the standard market.
Pentawire 5/5 AT
acrobatreader
download 443Kb
catalogo Download 1.7MB
Polywire 5/16
Stationary multiple diamond wire saw to cut up to 16 slabs at the same time, in marble or granite. The machine is controlled by a computerised system with a PLC.
polywire 5 16
acrobatreader
download 156Kb
Polywire 5/34
Stationary multiple diamond wire saw to cut up to 34 slabs at the same time. Complete with a PLC and CNC system.
polywire 5 32
acrobatreader
download 108Kb
catalogo Download 500 KB
Polywire 20
Multiwire saw with a big multi-groove drum (2.35 mt diameter) on the motor side and twenty big independent tensioning flywheels (2 mt in diameter), each tensioned by the patented Multipull system to manage at best the cutting conditions and optimize the life of the diamond wires. The plant is complete with a multi-groove guide drum (0.6 mt diameter) on the tensioning side to ensure further cutting precision. The motor drum, the tensioning flywheels and the guide drum are covered with replaceable multi-groove bands. A robust structure, composed by two rectangular section vertical columns, having high resistance to bending and torsion, grants high rigidity and maximum precision. The typical thicknesses of the slabs can be adjusted quickly without moving the flywheels. A special automatic comb device prevents any slabs movements during the cutting operations, avoiding their breakage and facilitating the exit of the wires after each cut. The control panel includes a PLC that controls the block trolley displacement after each cut, allowing an automatic sequence of cutting cycles.
Polywire 20
acrobatreader
download
500 KB
© PELLEGRINI MECCANICA SPA - viale delle Nazioni, 8 - 37135 Verona, (Italy) Tel: +39.0458203666 - Fax: +39.0458201744 - P.IVA 00724710231
Stone Master | Marmomacchine | Eurosollevamento | Beton Division